Home > Articles > Assemble 5x5x4 :

How to assemble 5x5x4

4x4x5

It is not very hard to disassemble or assemble 554.
I think it is easier than 445.

First, to disassemble this cube, just take the center-cap off, then you can see the screw.


 

Now, let's see how to assemble it: (click to see large photos)


Step.1

Connect 5 center-parts with 6-axis-core.

Tighten the screws into the end.
Keep just a little little little gap
(maybe 0.1mm)
.



Step.2

Assemble the tiny part.
do not assemble it completely.
Just hang it on, that's OK.



Step.3

Put the two assembled parts onto one center-part.



Step.4

Find a center-edge-part and a center-surface-part,
add them on.



Step.5

Add them onto the other 3 directions.



Step.6

Add 4 assembled corner-surface-parts
on the corner of center-part.



Step.7

Prepare 4 pair of side-edge-parts,
put them on each side of the center-edge-part.



Step.8

Add 4 corner-parts on, them the first layer is ready.



Step.9

Put 4 pair of 2-layer-surface-parts
on each side of the center-part.


Step.10

Add 4 2-layer-edge-parts on the corner,
then the second layer is OK.



Step.11

Take 2 T-shaped-parts and one hidden-edge-part,
put them as a group.

add them to the middle of two center-parts.
The hidden layer is OK.



Step.12

Add the third layer on,
just same as the second layer.



Step.13

Add on the out side parts of the top layer.



Step.14

Add 4 corner-surface-parts on the corner.
Add 4 center-surface-parts on.



Step.15

Put the center-parts on, tighten the screw.
Fianlly, covered with the center-cap, that's OK !



< Back